xcall MIAMEX, MX_BEVEL, opcode, bevel, linedraw
(Windows only) MX_BEVEL allows you to query or set the beveling options, which are otherwise available on the Edit menu or via the SET BEVEL command.
See the TAB(-10,x) Function Listing for an equivalent Print Tab command (AG_BEVEL).
Parameters
opcode (Num)
0 to query the current options or 1 to set them
bevel (Num)
indicates the bevel mode:
|
Value |
Meaning |
|
0 |
Beveling off |
|
1 |
Beveling set to automatic |
|
2 |
Beveling set to program control. In this case, to turn beveling on within a program, you can use "? Tab(-10,BEVEL); str(FLAGS); chr(127)" where FLAGS are values that control beveling options, with the most useful choices being 0 (off), 255 (on, with no line drawing characters) or 15 (beveling, but use line drawing characters also). |
linedraw (Num)
should be set to 0 for enabled, or 1 for disabled. (The recommendation is to disable line drawing when beveling is active so that lines will be represented entirely by the 3D raised objects.)