Updated May 2017
This parameter is used to enable exit keys and other options according to the tables below. Note that although most of the flags are optional niceties, a few are critical to proper XTREE operation. In particular, XTF_XYXY is required, and XTF_COLDFX is nearly always appropriate. The parameter can be mapped in one of three ways:
MAP1 FLAGS,B,4 ! (XTF_xxx)
or
MAP1 XFLAGS
MAP2 FLAGS,B,4 ! (XTF_xxx)
MAP2 FLAGS2,B,4 ! (XTF2_xxx)
or
MAP1 XFLAGS, ST_XFLAGS ! (defined in ashinc:xtree.sdf)
The second or third form is required if you want to use any of the XTF2_xxxx flags (i.e. XTREE Flags2), but in that case, note that you must specify XFLAGS (i.e. the structure) rather than either flags or flags2 in the parameter list.
To set individual flags, just add (or combine using the "OR" operator) the corresponding symbols or values, for example:
FLAGS = XTF_XYXY or XTF_COLDFX
or
XFLAGS.FLAGS2 = XFLAGS.FLAGS2 or XTF2_DRAGDROP2
flags2 and the XTF2 symbols have their own section here: XTREE Flags2. Also see XTR.MISCFLAGS for additional flags and more information.
The symbol definitions come from ashinc:xtree.def.
Symbol |
Value |
Description |
---|---|---|
XTF_FKEY |
&h00000001 |
Allow F1-F16 (returning Exitcodes -1 through –16) |
XTF_LEFT |
&h00000002 |
Enable Left arrow (Exitcode -40) |
XTF_RIGHT |
&h00000004 |
Enable Right arrow (Exitcode –41) |
XTF_UP |
&h00000008 |
Enable Ctrl+Up arrow on first row (Exitcode -42). See "Locating and Selecting Items ... Use the Up/Down-arrow keys " in Mouse and Keyboard. |
XTF_TAB |
&h00000020 |
Enable Tab key (Exitcode -44), and Shift+Tab (Exitcode -35) |
XTF_HOME |
&h00000040 |
Enable Home key (Exitcode –45) |
XTF_END |
&h00000080 |
EnableEnd key (Exitcode –46) |
&h00000100 |
Controls Escape and Enter keys when in editing mode. Note that INMEMO used this flag value for the "no auto-shrink" option, which isn't applicable to XTREE. |
|
&h00000200 |
Leave list box on the screen after exit from the subroutine. |
|
XTF_TIMOUT |
&h00000400 |
For the PCKLST (text mode) only, sets a 200 second timeout—i.e., acts as if user had hit Escape. For XTREE, ignored; use XTR.TIMOUT instead. |
XTF_FST |
&h00000800 |
Fast selection mode. In PCKLST, this means menu items can be selected by entering the minimum number of characters to uniquely identify the item. (Without the XTF_FST flag, Enter would be required to complete the selection.) For XTREE, this means that a single click (completes the selection operation, rather than requiring a double-click or a click followed by Tab). |
&h00001000 |
Control interpretation of first record. |
|
XTF_XYXY |
&h00002000 |
Interpret the 1st and 2nd parameters (row, col) as starting row, starting col, and the 8th and 9th parameters (strow, endrow) as ending row, ending col. Mandatory for XTREE, optional for PCKLST. |
&h00004000 |
Allow sorting. |
|
XTF_REORD |
&h00008000 |
Allow column reordering by drag and drop. (Note that if enabled globally, it can still be turned off for individual columns.) |
&h00010000 |
Allow multiple selections. |
|
XTF_MLVL |
&h00020000 |
Multi-level (hierarchical) row support. This will be set automatically if the first column defined in coldef uses the @ code. Sample images here and here. Also see Multi-level Lists. |
&h00040000 |
Coldef parameter uses the advanced syntax. |
|
XTF_VARY |
&h00080000 |
Variable height rows. Calculation is subject to maximum number of text lines per item as set in the xtrctl XTR.itemlines parameter. |
&h00100000 |
Exit immediately, rather than waiting for the user to make a selection. (This only makes sense in conjunction with XTF_MODELESS; also see xtrctl XTR.opcode) |
|
&h00200000 |
Disable the tree control on exit. |
|
XTF_DEL |
&h00400000 |
Enable Del exit (Exitcode –47) |
&h00800000 |
Return result via row number in answer parameter. |
|
XTF_CTRLC |
&h01000000 |
Causes Ctrl+C to set Exitcode 10 (as in INFLD) instead of 1. |
XTF_EDITABLE |
&h02000000 |
Indicates an Editable Tree Control—i.e. containing one or more editable columns. Note that although cformat codes (E, T, etc.) may appear to activate editing mode by themselves, this flag needs to be set manually so that it can inform the handling of the array parameter before the coldef parameter can be parsed. |
XTF_TOTALS |
&h04000000 |
Declare that last line of data contains totals (and thus is not to be sorted). |
&h08000000 |
Defeats redraw/refresh of data. |
|
&h10000000 |
Item drag-drop (within a single XTREE control). |
|
&h20000000 |
Activates split or dual-pane mode. |
|
&h40000000 |
Prevents XTREE from exiting with EXITCODE 0. |
|
Definition file: ashinc:xtree.def |
Jump to XTREE Flags2 table.