[MIAME]
SERIAL=4131UFS8GTA-QHTQ2T-7R35U7-L3JR3E9        ; Serial # and key
; Standard configuration file for MIAME/WIN  (c) MicroSabio 1998
CONAME=%MIAME%\CONAME.DAT			; Licensee file
FILES=40,40					; 40 files, 40 ISAM
SSD=001-002-003-004-005-006-007-008		; No SSD by default
ERSATZ=%MIAME%\DSK0\001004\ERSATZ.INI		; AMOS Ersatz definition file
ERSATZ=%MIAME%\DSK0\001004\RUNDEV.ERZ		; Alphasoft RUN files
ERSATZ=%MIAME%\DSK0\001004\SRCDEV.ERZ		; Alphasoft source code
ERSATZ=%MIAME%\DSK0\001004\CPY.ERZ		; Alphasoft include files
ERSATZ=%MIAME%\DSK0\001004\PAKDEV.ERZ		; Alphasoft package run time Ppns
LANGUAGE=%MIAME%\DSK0\001006\BRTISH.LDF
CONSOLE=NETUNIQUE,PCTDVG			; Console device format

;Device definitions
;Use this format to isolate single ppn's
;DEVICE=DSK0:[1,4] "%MIAME%\DSK0\001004\"
;Use this format for entire logical disks with implicit \###### ppn's
DEVICE=DSK0 "%MIAME%\DSK0\"			; Pathname for DSK0:
DEVICE=DSK1 "%MIAME%\DSK1\"			; Pathname for DSK1:
DEVICE=DSK2 "%MIAME%\DSK2\"			; Pathname for DSK2:
DEVICE=DSK3 "%MIAME%\DSK3\"			; Pathname for DSK3:
DEVICE=DSK4 "%MIAME%\DSK4\"			; Pathname for DSK4:
DEVICE=DSK5 "%MIAME%\DSK5\"			; Pathname for DSK5:
DEVICE=SRC0 "%MIAME%\SRC0\"			; Pathname for SRC0:
DEVICE=RUN0 "%MIAME%\RUN0\"			; Pathname for RUN0:
DEVICE=DSK30 "%MIAME%\DSK30\"			; Pathname for DSK30:
DEVICE=hm0 "%MIAME%\hm0\"			; Pathname for hm0:
DEVICE=ep0 "%MIAME%\ep0\"			; Pathname for ep0:
DEVICE=cp0 "%MIAME%\cp0\"			; Pathname for cp0: (copy of DSK2:)
DEVICE=ins0 "%MIAME%\ins0\"			; Pathname for ins0: (copy of DSK0: as installed)
DEVICE=asf0 "%MIAME%\asf0\"			; Pathname for asf0: (Additional Alphasoft bits for DSK0:)
DEVICE=asf1 "%MIAME%\asf1\"			; Pathname for asf1: (Alphasoft software and parameters bits for DSK1:)
DEVICE=asf2 "%MIAME%\asf2\"			; Pathname for asf2: (Alphasoft source code for DSK2:)
DEVICE=img0 "%MIAME%\images\"			; Pathname for img0: (Alphasoft images)
DEVICE=cir0 "%MIAME%\cir0\"			; Pathname for cir0: (Circle HR/PR)
DEVICE=was0 "%MIAME%\was0\"			; Pathname for was0: (Last backup)
DEVICE=dte0 "%MIAME%\dte0\"			; Pathname for dte0: (Dated dev copies)
;DEVICE=FLP0 A:\				; FLP0: == drive A:\
;
;Subroutine aliases (alias-name:ashell-name)
ALIAS=ERRMSG:DERR  
ALIAS=INPUT:INFLD
ALIAS=JOBNAM:GETJOB
ALIAS=NOEKO:NOECHO
ALIAS=RENAM:RENAME
ALIAS=SPOOL:EZSPL
ALIAS=ASMENU:COMMON
ALIAS=CMNTIM:COMMON
ALIAS=ESTNUM:COMMON
ALIAS=NEWKEY:ACCEPT
;Use this for COM xcalls...
ALIAS=FTPDLX:FtpDLXcall.FTP


;Uncomment for tracing...
;TRACE=BASERR,SIGHUP,INOUT
;TRACE=SYSERR,LP,AMSORT,FOPENS,ATE,XCALL,ISAM,RW,GUI,INOUT
TRACE=BASERR,SIGHUP,LP,XCALL,INOUT
;Subroutine options (allow null input on 'J' TYPE, 
;  in date input, if year < 80, assume 20xx), memory-based quick sorting
;  
SBR=INFLD143,CCYY:80,MALLOCSORT,AMOS_RUNSBR
SBR=PGRW_TTI				; Alphasoft
SBR=MSGNUM:50,MSGSIZ:500		; Alphasoft
SBR=PCKLST_GUI				; Automatic redirect of PCKLST to XTREE
;SBR=INFDEF:|G||C			; Use GUI version of INFLD	
SBR=INFDEF:|_                           ; For INFLD to use underlines 
SBR=INFLD_KEEPALIVE			; Send keepalive probes

LOKSER=ON     				; Enable LOKSER with ISAM sequence checks
MAPIDA=OFF				; Don't Map .IDA to .DAT for C-ISAM


;Modify to specify default spooler name
;PRINTER=PROMPT				; Set printer default to PROMPT
PRINTER=lp0				; Set printer default to lp0
MEMORY=3000K				; A-Shell memory partition

;Specify font
;FONT=MIAME Terminal			; this is default (OEM charset)
;Following is probably best, but requires that you install Andale font
;FONT=Andale Mono,OEM			; Andale font, OEM charset
;CHARSET=OEM
;FONT=Courier New,ANSI			; Courier new font, ANSI charset
FONT=Lucida Console,ANSI
CHARSET=LATIN1

;Misc global options - uncomment as needed (may be combined with commas)
;OPTIONS=EXTFIO				; Extended file i/o 
;OPTIONS=BRKALC				; Fill allocated files with ]]]
;OPTIONS=HEXDEC				; "hexadecade" date mode 
;OPTIONS=NOFLDATTR			; Ignore field attributes
;OPTIONS=FIELDEMU			; Emulate field attributes
;OPTIONS=NOLEADFF			; Strip leading FF from prt files
;OPTIONS=NOAUTOXLT			; Disable auto convert of PgUp (^R),
;					;   PgDn (^T) etc.
;OPTIONS=NTTS				; NT Terminal Server license mode
;OPTIONS=FIELDEMU			; Emulate field attributes
;OPTIONS=FPROUND			; Round f.p. expressions slightly
;OPTIONS=EXITWAIT			; Wait for kbd ack before exiting
;OPTIONS=ABSLOOKUP			; Make LOOKUP always return >= 0
OPTIONS=LONGDIR                         ; DIR will assume 10.3 (not 6.3)
OPTIONS=GUI_SPC_IND                     ; Better auto tokenizing (tprint)
;
;Misc parameters [default in brackets]
;IATIMEOUT=60				; Inactivity timeout minutes [none]
;MAXJOBS=10				; Max jobs total [2-4x license]
;MAXINST=4				; Max instances per PC [no limit]
;IJCFREQ=10				; Inter-Job-Comm interval secs [5-30]
;
QUEUE=100,DISK:%MIAME%\QFLOCK.SYS	; No. queue blocks (FLOCK, XLOCK)