Well, all printing issues are strange!

Someone seems to have reinstalled some network printers at one of our customers. They still print fine from Madics (DEVICE=AUXLOC:) but they will no longer do a Print Screen print!

It looks like, with an admittedly small sample size that the printers that are not working were installed as WSD printers rather than on TCP/IP ports. There printers that are on TCP/IP ports are still printing.

I could understand that except that they are printing with AUXLOC , and the disparity seems very odd.

Dom

I'm sorry to say that my reported ability to see the future has been greatly exaggerated, and I certainly didn't see this one coming. In fact, I can't even see it (or at least understand it) now that it's here. But I do have a question...

The PrintScreen operates within ATE on the client side. So if you click the print button the print screen dialog, it will print essentially the same way A-Shell/Windows would (since ATE is really just a special case of A-Shell/Windows). And you say that doesn't work. But printing a report from the server via AUXLOC: does work. But AUXLOC: just sends the file to the PC and then prints it from there. At that point it would seem exactly like printing from the PrintScreen, except possibly to a different printer. The question is whether APEX is in the mix. If so, then it would provide a common waypoint for both print paths, and also provide a common printer selection dialog and printing environment.

That would answer the question once and for all whether the issue has anything to do with PrintScreen vs AUXLOC:, or is strictly a question of which printer/driver is being used. (I think we're both concluding the latter, but it didn't seem 100% certain from your description.)

A quick scan of the internet suggests that you/we are not the only ones sufferning from WSD-induced woes. Some examples ...
Difference between a WSD Printer Port and TCP port
wsd-seems-great-installing-printers-shouldnt-use/
wsd to the moon
wsd-printing-breaks-my-network-printer/

While I can't say that I've really tried to absorb all of that, the one thought I have for why it may appear that PrintScreen and AUXLOC: have different results to the same printer is that in one case we may have a printer init file that specifies the printer by a locally-defined name, whereas in the other case it's being identified by a network name (and the network discovery is being messed up by WSD).

The select printer dialog box pops up in both cases and the same entry is chosen from the box.

That sounds fairly convincing that it is the same printing logic, but it is still possible that you're dealing with what appears to be the same printer selection mechanism (i.e. the standard Windows printer selection dialog), but it's being invoked from different contexts. If for example the printer device is set to PROMPT:, then perhaps there could be a subtle difference between the AUXLOC: and "normal" spooler operation. But it if was APEX, then there would be absolutely no difference. (Once the file is picked for preview by APEX, then it becomes APEX's job to print it, regardless of how it got there.)

I guess the other thing you could try would be to activate the LP trace, perhaps with the XDEBUG option turned on as well, to see if we can identify any differences in the processing. In the case of PrintScreen, you can probably do that most easily via the double-right-click to bring up the debug message window and use the Properties dialog to set the traces. In the case of AUXLOC: you may need to go into the Connection Properties, Printer tab, and tick the Debug checkbox. (The reason for the difference is that under ATE/APEX, it spawns a new session for each print request so that the preview doesn't hold up operations with the server, but the newly spawned session doesn't inherit the runtime-set trace flags.)

I got the two debug traces, I am note sure I got the right thing for the AUXLOC: . They are in the next two replies.

0 13:59:29 <TELNET:45e4> SETFOCUS
1 13:59:29 <TELNET:45e4> SETFOCUS
2 13:59:34 <TELNET:45e4> wait on socket: 13:59:29 .....
3 13:59:40 <TELNET:APRNTSCRN:45e4> Executing c:\ATE\DSK0\007006\APRNTSCRN.SBX @06A25220 (APRNTSCRN @00915E50)
4 13:59:40 <TELNET:APRNTSCRN:215> Save attribs: xy=13,12; cat=0, rat=0, fg=2, bg=0
5 13:59:40 <TELNET:APRNTSCRN:22f> cstack add op x13 at offset 22
Fn'MinAshVer(5,1,1216,0,0): ash: 6,5,1692,1 ate: 0,0,0,0 = 104047601
7 13:59:40 <TELNET:APRNTSCRN:22f> cstack rmv op x13 at offset 22, resoff=0
8 13:59:40 <TELNET:APRNTSCRN:2aa> cstack add op x14 at offset 22
9 13:59:40 <TELNET:APRNTSCRN:37a5> cstack add op x15 at offset 33
10 13:59:40 <TELNET:INIX:37a5> Executing c:\ATE\DSK0\007006\INIX.SBX @009339A8 (INIX @008C3DC8)
11 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
12 Read'INI'File(bas:aprntscrn.cfg,IMAGE,SaveDir,%miame%\captures)
13 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
14 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
15 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
16 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
17 Fn'Load'INI: MX_USRMAP midx=[0] modname$=[aprntscrn.x000] m'bytes=[0] m'flags=[0]
18 13:59:40 <TELNET:INIX:b0b> cstack add op x13 at offset 74
19 13:59:40 <TELNET:INIX:b0b> cstack rmv op x13 at offset 74, resoff=0
20 13:59:40 <TELNET:INIX:b30> cstack add op x13 at offset 74
21 13:59:40 <TELNET:INIX:b30> cstack rmv op x13 at offset 74, resoff=0
22 13:59:40 <TELNET:INIX:b49> cstack add op x13 at offset 74
23 13:59:40 <TELNET:INIX:b49> cstack rmv op x13 at offset 74, resoff=0
24 13:59:40 <TELNET:INIX:bc9> cstack add op x13 at offset 74
25 13:59:40 <TELNET:INIX:bc9> cstack rmv op x13 at offset 74, resoff=0
26 Fn'Load'INI - copying bas:aprntscrn.cfg to C:\Users\gh\AppData\Local\Temp\aprntscrn.x000
27 13:59:40 <TELNET:INIX:c0c> cstack add op x13 at offset 74
28 13:59:40 <TELNET:INIX:c0c> cstack rmv op x13 at offset 74, resoff=0
29 New module [aprntscrn.x000] loaded; hdr=[ 659, 1604419396..] f'bytes=[659]
30 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
31 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
32 Fn'Module'Instr(6,[IMAGE],0)
33 Fn'Module'Instr ashver=[1692.1]
34 Fn'Module'Instr searchmode=[4] returns 199
35 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
36 Fn'Read'INI$: sectionpos=[199] midx=[6]
37 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
38 Fn'Module'Instr(6,.SaveDir=,200)
39 Fn'Module'Instr searchmode=[4] returns 243
40 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
41 Fn'Read'INI$: itempos=[243] midx=[6] sectionpos=[199]
42 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
43 Fn'Module'Instr(6,.[,200)
44 Fn'Module'Instr searchmode=[4] returns 455
45 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
46 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
47 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[SaveDir=%miame%\captures..;image type (p...] itempos=[243]
48 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
49 13:59:40 <TELNET:APRNTSCRN:37a5> cstack rmv op x15 at offset 33, resoff=33
50 13:59:40 <TELNET:APRNTSCRN:3802> cstack add op x15 at offset 33
51 13:59:40 <TELNET:INIX:3802> Executing c:\ATE\DSK0\007006\inix.sbx @009339A8 (INIX @06A30CE8)
52 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
53 Read'INI'File(bas:aprntscrn.cfg,IMAGE,FilePrefix,img)
54 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
55 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
56 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
57 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
58 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
59 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
60 Fn'Load'INI File matches memory module size and timestamp; no reload needed
61 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
62 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
63 Fn'Module'Instr(6,[IMAGE],0)
64 Fn'Module'Instr ashver=[1692.1]
65 Fn'Module'Instr searchmode=[4] returns 199
66 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
67 Fn'Read'INI$: sectionpos=[199] midx=[6]
68 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
69 Fn'Module'Instr(6,.FilePrefix=,200)
70 Fn'Module'Instr searchmode=[4] returns 207
71 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
72 Fn'Read'INI$: itempos=[207] midx=[6] sectionpos=[199]
73 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
74 Fn'Module'Instr(6,.[,200)
75 Fn'Module'Instr searchmode=[4] returns 455
76 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
77 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
78 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[FilePrefix=img..;capture directory..Save...] itempos=[207]
79 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
80 13:59:40 <TELNET:APRNTSCRN:3802> cstack rmv op x15 at offset 33, resoff=33
81 13:59:40 <TELNET:APRNTSCRN:382a> cstack add op x15 at offset 33
82 13:59:40 <TELNET:INIX:382a> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
83 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
84 Read'INI'File(bas:aprntscrn.cfg,IMAGE,ImageType,png)
85 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
86 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
87 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
88 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
89 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
90 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
91 Fn'Load'INI File matches memory module size and timestamp; no reload needed
92 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
93 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
94 Fn'Module'Instr(6,[IMAGE],0)
95 Fn'Module'Instr ashver=[1692.1]
96 Fn'Module'Instr searchmode=[4] returns 199
97 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
98 Fn'Read'INI$: sectionpos=[199] midx=[6]
99 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
100 Fn'Module'Instr(6,.ImageType=,200)
101 Fn'Module'Instr searchmode=[4] returns 304
102 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
103 Fn'Read'INI$: itempos=[304] midx=[6] sectionpos=[199]
104 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
105 Fn'Module'Instr(6,.[,200)
106 Fn'Module'Instr searchmode=[4] returns 455
107 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
108 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
109 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[ImageType=png..Comp=65536..ConvertToGray...] itempos=[304]
110 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
111 13:59:40 <TELNET:APRNTSCRN:382a> cstack rmv op x15 at offset 33, resoff=33
112 13:59:40 <TELNET:APRNTSCRN:388e> cstack add op x15 at offset 33
113 13:59:40 <TELNET:INIX:388e> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
114 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
115 Read'INI'File(bas:aprntscrn.cfg,IMAGE,Comp,0)
116 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
117 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
118 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
119 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
120 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
121 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
122 Fn'Load'INI File matches memory module size and timestamp; no reload needed
123 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
124 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
125 Fn'Module'Instr(6,[IMAGE],0)
126 Fn'Module'Instr ashver=[1692.1]
127 Fn'Module'Instr searchmode=[4] returns 199
128 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
129 Fn'Read'INI$: sectionpos=[199] midx=[6]
130 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
131 Fn'Module'Instr(6,.Comp=,200)
132 Fn'Module'Instr searchmode=[4] returns 319
133 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
134 Fn'Read'INI$: itempos=[319] midx=[6] sectionpos=[199]
135 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
136 Fn'Module'Instr(6,.[,200)
137 Fn'Module'Instr searchmode=[4] returns 455
138 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
139 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
140 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[Comp=65536..ConvertToGray=1..InkSaver=0....] itempos=[319]
141 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
142 13:59:40 <TELNET:APRNTSCRN:388e> cstack rmv op x15 at offset 33, resoff=33
143 13:59:40 <TELNET:APRNTSCRN:38ae> cstack add op x15 at offset 33
144 13:59:40 <TELNET:INIX:38ae> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
145 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
146 Read'INI'File(bas:aprntscrn.cfg,IMAGE,ConvertToGray,1)
147 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
148 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
149 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
150 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
151 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
152 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
153 Fn'Load'INI File matches memory module size and timestamp; no reload needed
154 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
155 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
156 Fn'Module'Instr(6,[IMAGE],0)
157 Fn'Module'Instr ashver=[1692.1]
158 Fn'Module'Instr searchmode=[4] returns 199
159 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
160 Fn'Read'INI$: sectionpos=[199] midx=[6]
161 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
162 Fn'Module'Instr(6,.ConvertToGray=,200)
163 Fn'Module'Instr searchmode=[4] returns 331
164 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
165 Fn'Read'INI$: itempos=[331] midx=[6] sectionpos=[199]
166 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
167 Fn'Module'Instr(6,.[,200)
168 Fn'Module'Instr searchmode=[4] returns 455
169 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
170 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
171 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[ConvertToGray=1..InkSaver=0..Negate=0..;...] itempos=[331]
172 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
173 13:59:40 <TELNET:APRNTSCRN:38ae> cstack rmv op x15 at offset 33, resoff=33
174 13:59:40 <TELNET:APRNTSCRN:38d7> cstack add op x15 at offset 33
175 13:59:40 <TELNET:INIX:38d7> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
176 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
177 Read'INI'File(bas:aprntscrn.cfg,IMAGE,InkSaver,1)
178 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
179 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
180 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
181 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
182 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
183 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
184 Fn'Load'INI File matches memory module size and timestamp; no reload needed
185 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
186 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
187 Fn'Module'Instr(6,[IMAGE],0)
188 Fn'Module'Instr ashver=[1692.1]
189 Fn'Module'Instr searchmode=[4] returns 199
190 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
191 Fn'Read'INI$: sectionpos=[199] midx=[6]
192 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
193 Fn'Module'Instr(6,.InkSaver=,200)
194 Fn'Module'Instr searchmode=[4] returns 348
195 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
196 Fn'Read'INI$: itempos=[348] midx=[6] sectionpos=[199]
197 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
198 Fn'Module'Instr(6,.[,200)
199 Fn'Module'Instr searchmode=[4] returns 455
200 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
201 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
202 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[InkSaver=0..Negate=0..;SourceWindow is s...] itempos=[348]
203 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
204 13:59:40 <TELNET:APRNTSCRN:38d7> cstack rmv op x15 at offset 33, resoff=33
205 13:59:40 <TELNET:APRNTSCRN:38fb> cstack add op x15 at offset 33
206 13:59:40 <TELNET:INIX:38fb> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
207 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
208 Read'INI'File(bas:aprntscrn.cfg,IMAGE,Negate,0)
209 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
210 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
211 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
212 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
213 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
214 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
215 Fn'Load'INI File matches memory module size and timestamp; no reload needed
216 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
217 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
218 Fn'Module'Instr(6,[IMAGE],0)
219 Fn'Module'Instr ashver=[1692.1]
220 Fn'Module'Instr searchmode=[4] returns 199
221 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
222 Fn'Read'INI$: sectionpos=[199] midx=[6]
223 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
224 Fn'Module'Instr(6,.Negate=,200)
225 Fn'Module'Instr searchmode=[4] returns 360
226 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
227 Fn'Read'INI$: itempos=[360] midx=[6] sectionpos=[199]
228 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
229 Fn'Module'Instr(6,.[,200)
230 Fn'Module'Instr searchmode=[4] returns 455
231 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
232 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
233 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[Negate=0..;SourceWindow is same as IMGOP...] itempos=[360]
234 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
235 13:59:40 <TELNET:APRNTSCRN:38fb> cstack rmv op x15 at offset 33, resoff=33
236 13:59:40 <TELNET:APRNTSCRN:391d> cstack add op x15 at offset 33
237 13:59:40 <TELNET:INIX:391d> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
238 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
239 Read'INI'File(bas:aprntscrn.cfg,IMAGE,SourceWindow,-2)
240 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
241 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
242 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
243 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
244 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
245 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
246 Fn'Load'INI File matches memory module size and timestamp; no reload needed
247 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
248 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
249 Fn'Module'Instr(6,[IMAGE],0)
250 Fn'Module'Instr ashver=[1692.1]
251 Fn'Module'Instr searchmode=[4] returns 199
252 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
253 Fn'Read'INI$: sectionpos=[199] midx=[6]
254 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
255 Fn'Module'Instr(6,.SourceWindow=,200)
256 Fn'Module'Instr searchmode=[4] returns 422
257 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
258 Fn'Read'INI$: itempos=[422] midx=[6] sectionpos=[199]
259 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
260 Fn'Module'Instr(6,.[,200)
261 Fn'Module'Instr searchmode=[4] returns 455
262 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
263 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
264 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[SourceWindow=-2..ClientOnly=0..[OUTPUT...] itempos=[422]
265 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
266 13:59:40 <TELNET:APRNTSCRN:391d> cstack rmv op x15 at offset 33, resoff=33
267 13:59:40 <TELNET:APRNTSCRN:3946> cstack add op x15 at offset 33
268 13:59:40 <TELNET:INIX:3946> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
269 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
270 Read'INI'File(bas:aprntscrn.cfg,IMAGE,ClientOnly,0)
271 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
272 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
273 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
274 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
275 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
276 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
277 Fn'Load'INI File matches memory module size and timestamp; no reload needed
278 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
279 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
280 Fn'Module'Instr(6,[IMAGE],0)
281 Fn'Module'Instr ashver=[1692.1]
282 Fn'Module'Instr searchmode=[4] returns 199
283 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
284 Fn'Read'INI$: sectionpos=[199] midx=[6]
285 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
286 Fn'Module'Instr(6,.ClientOnly=,200)
287 Fn'Module'Instr searchmode=[4] returns 439
288 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
289 Fn'Read'INI$: itempos=[439] midx=[6] sectionpos=[199]
290 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
291 Fn'Module'Instr(6,.[,200)
292 Fn'Module'Instr searchmode=[4] returns 455
293 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
294 Fn'Read'INI$: nextsectionpos=[455] midx=[6] sectionpos=[199]
295 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[ClientOnly=0..[OUTPUT]..Printer=..Orie...] itempos=[439]
296 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
297 13:59:40 <TELNET:APRNTSCRN:3946> cstack rmv op x15 at offset 33, resoff=33
298 13:59:40 <TELNET:APRNTSCRN:39e0> cstack add op x15 at offset 33
299 13:59:40 <TELNET:INIX:39e0> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
300 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
301 Read'INI'File(bas:aprntscrn.cfg,OUTPUT,Printer,)
302 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
303 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
304 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
305 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
306 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
307 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
308 Fn'Load'INI File matches memory module size and timestamp; no reload needed
309 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
310 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
311 Fn'Module'Instr(6,[OUTPUT],0)
312 Fn'Module'Instr ashver=[1692.1]
313 Fn'Module'Instr searchmode=[4] returns 456
314 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
315 Fn'Read'INI$: sectionpos=[456] midx=[6]
316 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
317 Fn'Module'Instr(6,.Printer=,457)
318 Fn'Module'Instr searchmode=[4] returns 465
319 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
320 Fn'Read'INI$: itempos=[465] midx=[6] sectionpos=[456]
321 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
322 Fn'Module'Instr(6,.[,457)
323 Fn'Module'Instr searchmode=[4] returns 609
324 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
325 Fn'Read'INI$: nextsectionpos=[609] midx=[6] sectionpos=[456]
326 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[Printer=..Orientation=Portrait..Title=Ma...] itempos=[465]
327 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
328 13:59:40 <TELNET:APRNTSCRN:39e0> cstack rmv op x15 at offset 33, resoff=33
329 13:59:40 <TELNET:APRNTSCRN:3a02> cstack add op x15 at offset 33
330 13:59:40 <TELNET:INIX:3a02> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
331 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
332 Read'INI'File(bas:aprntscrn.cfg,OUTPUT,Orientation,Portrait)
333 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
334 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
335 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
336 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
337 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
338 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
339 Fn'Load'INI File matches memory module size and timestamp; no reload needed
340 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
341 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
342 Fn'Module'Instr(6,[OUTPUT],0)
343 Fn'Module'Instr ashver=[1692.1]
344 Fn'Module'Instr searchmode=[4] returns 456
345 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
346 Fn'Read'INI$: sectionpos=[456] midx=[6]
347 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
348 Fn'Module'Instr(6,.Orientation=,457)
349 Fn'Module'Instr searchmode=[4] returns 475
350 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
351 Fn'Read'INI$: itempos=[475] midx=[6] sectionpos=[456]
352 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
353 Fn'Module'Instr(6,.[,457)
354 Fn'Module'Instr searchmode=[4] returns 609
355 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
356 Fn'Read'INI$: nextsectionpos=[609] midx=[6] sectionpos=[456]
357 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[Orientation=Portrait..Title=Madics ATE S...] itempos=[475]
358 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
359 13:59:40 <TELNET:APRNTSCRN:3a02> cstack rmv op x15 at offset 33, resoff=33
360 13:59:40 <TELNET:APRNTSCRN:3a60> cstack add op x15 at offset 33
361 13:59:40 <TELNET:INIX:3a60> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
362 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
363 Read'INI'File(bas:aprntscrn.cfg,OUTPUT,Title,)
364 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
365 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
366 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
367 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
368 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
369 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
370 Fn'Load'INI File matches memory module size and timestamp; no reload needed
371 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
372 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
373 Fn'Module'Instr(6,[OUTPUT],0)
374 Fn'Module'Instr ashver=[1692.1]
375 Fn'Module'Instr searchmode=[4] returns 456
376 13:59:40 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
377 Fn'Read'INI$: sectionpos=[456] midx=[6]
378 13:59:40 <TELNET:INIX:10da> cstack add op x13 at offset 63
379 Fn'Module'Instr(6,.Title=,457)
380 Fn'Module'Instr searchmode=[4] returns 497
381 13:59:40 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
382 Fn'Read'INI$: itempos=[497] midx=[6] sectionpos=[456]
383 13:59:40 <TELNET:INIX:1165> cstack add op x13 at offset 63
384 Fn'Module'Instr(6,.[,457)
385 Fn'Module'Instr searchmode=[4] returns 609
386 13:59:40 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
387 Fn'Read'INI$: nextsectionpos=[609] midx=[6] sectionpos=[456]
388 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[Title=Madics ATE Screen Capture..EmailTo...] itempos=[497]
389 13:59:40 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
390 13:59:40 <TELNET:APRNTSCRN:3a60> cstack rmv op x15 at offset 33, resoff=33
391 13:59:40 <TELNET:APRNTSCRN:3a80> cstack add op x15 at offset 33
392 13:59:40 <TELNET:INIX:3a80> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
393 13:59:40 <TELNET:INIX:415> cstack add op x13 at offset 52
394 Read'INI'File(bas:aprntscrn.cfg,OUTPUT,EmailTo,)
395 13:59:40 <TELNET:INIX:101b> cstack add op x13 at offset 63
396 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
397 13:59:40 <TELNET:INIX:7e8> cstack add op x13 at offset 74
398 13:59:40 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
399 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
400 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
401 Fn'Load'INI File matches memory module size and timestamp; no reload needed
402 13:59:40 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
403 13:59:40 <TELNET:INIX:1065> cstack add op x13 at offset 63
404 Fn'Module'Instr(6,[OUTPUT],0)
405 Fn'Module'Instr ashver=[1692.1]
406 Fn'Module'Instr searchmode=[4] returns 456
407 13:59:41 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
408 Fn'Read'INI$: sectionpos=[456] midx=[6]
409 13:59:41 <TELNET:INIX:10da> cstack add op x13 at offset 63
410 Fn'Module'Instr(6,.EmailTo=,457)
411 Fn'Module'Instr searchmode=[4] returns 530
412 13:59:41 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
413 Fn'Read'INI$: itempos=[530] midx=[6] sectionpos=[456]
414 13:59:41 <TELNET:INIX:1165> cstack add op x13 at offset 63
415 Fn'Module'Instr(6,.[,457)
416 Fn'Module'Instr searchmode=[4] returns 609
417 13:59:41 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
418 Fn'Read'INI$: nextsectionpos=[609] midx=[6] sectionpos=[456]
419 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[EmailTo=..;Use notes for email subject? ...] itempos=[530]
420 13:59:41 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
421 13:59:41 <TELNET:APRNTSCRN:3a80> cstack rmv op x15 at offset 33, resoff=33
422 13:59:41 <TELNET:APRNTSCRN:3aa2> cstack add op x15 at offset 33
423 13:59:41 <TELNET:INIX:3aa2> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
424 13:59:41 <TELNET:INIX:415> cstack add op x13 at offset 52
425 Read'INI'File(bas:aprntscrn.cfg,OUTPUT,EmailLog,/vm/miame/ashlog.log)
426 13:59:41 <TELNET:INIX:101b> cstack add op x13 at offset 63
427 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
428 13:59:41 <TELNET:INIX:7e8> cstack add op x13 at offset 74
429 13:59:41 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
430 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
431 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
432 Fn'Load'INI File matches memory module size and timestamp; no reload needed
433 13:59:41 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
434 13:59:41 <TELNET:INIX:1065> cstack add op x13 at offset 63
435 Fn'Module'Instr(6,[OUTPUT],0)
436 Fn'Module'Instr ashver=[1692.1]
437 Fn'Module'Instr searchmode=[4] returns 456
438 13:59:41 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
439 Fn'Read'INI$: sectionpos=[456] midx=[6]
440 13:59:41 <TELNET:INIX:10da> cstack add op x13 at offset 63
441 Fn'Module'Instr(6,.EmailLog=,457)
442 Fn'Module'Instr searchmode=[4] returns -1
443 13:59:41 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
444 Fn'Read'INI$: itempos=[-1] midx=[6] sectionpos=[456]
445 13:59:41 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
446 13:59:41 <TELNET:APRNTSCRN:3aa2> cstack rmv op x15 at offset 33, resoff=33
447 13:59:41 <TELNET:APRNTSCRN:3ac3> cstack add op x15 at offset 33
448 13:59:41 <TELNET:INIX:3ac3> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
449 13:59:41 <TELNET:INIX:415> cstack add op x13 at offset 52
450 Read'INI'File(bas:aprntscrn.cfg,OUTPUT,UseNotesForSubj,1)
451 13:59:41 <TELNET:INIX:101b> cstack add op x13 at offset 63
452 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
453 13:59:41 <TELNET:INIX:7e8> cstack add op x13 at offset 74
454 13:59:41 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
455 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
456 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
457 Fn'Load'INI File matches memory module size and timestamp; no reload needed
458 13:59:41 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
459 13:59:41 <TELNET:INIX:1065> cstack add op x13 at offset 63
460 Fn'Module'Instr(6,[OUTPUT],0)
461 Fn'Module'Instr ashver=[1692.1]
462 Fn'Module'Instr searchmode=[4] returns 456
463 13:59:41 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
464 Fn'Read'INI$: sectionpos=[456] midx=[6]
465 13:59:41 <TELNET:INIX:10da> cstack add op x13 at offset 63
466 Fn'Module'Instr(6,.UseNotesForSubj=,457)
467 Fn'Module'Instr searchmode=[4] returns 588
468 13:59:41 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
469 Fn'Read'INI$: itempos=[588] midx=[6] sectionpos=[456]
470 13:59:41 <TELNET:INIX:1165> cstack add op x13 at offset 63
471 Fn'Module'Instr(6,.[,457)
472 Fn'Module'Instr searchmode=[4] returns 609
473 13:59:41 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
474 Fn'Read'INI$: nextsectionpos=[609] midx=[6] sectionpos=[456]
475 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[UseNotesForSubj=1..[UI]..;User interfa...] itempos=[588]
476 13:59:41 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
477 13:59:41 <TELNET:APRNTSCRN:3ac3> cstack rmv op x15 at offset 33, resoff=33
478 13:59:41 <TELNET:APRNTSCRN:3af6> cstack add op x15 at offset 33
479 13:59:41 <TELNET:INIX:3af6> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
480 13:59:41 <TELNET:INIX:415> cstack add op x13 at offset 52
481 Read'INI'File(bas:aprntscrn.cfg,UI,UI,1)
482 13:59:41 <TELNET:INIX:101b> cstack add op x13 at offset 63
483 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
484 13:59:41 <TELNET:INIX:7e8> cstack add op x13 at offset 74
485 13:59:41 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
486 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
487 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
488 Fn'Load'INI File matches memory module size and timestamp; no reload needed
489 13:59:41 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
490 13:59:41 <TELNET:INIX:1065> cstack add op x13 at offset 63
491 Fn'Module'Instr(6,[UI],0)
492 Fn'Module'Instr ashver=[1692.1]
493 Fn'Module'Instr searchmode=[4] returns 610
494 13:59:41 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
495 Fn'Read'INI$: sectionpos=[610] midx=[6]
496 13:59:41 <TELNET:INIX:10da> cstack add op x13 at offset 63
497 Fn'Module'Instr(6,.UI=,611)
498 Fn'Module'Instr searchmode=[4] returns 638
499 13:59:41 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
500 Fn'Read'INI$: itempos=[638] midx=[6] sectionpos=[610]
501 13:59:41 <TELNET:INIX:1165> cstack add op x13 at offset 63
502 Fn'Module'Instr(6,.[,611)
503 Fn'Module'Instr searchmode=[4] returns -1
504 13:59:41 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
505 Fn'Read'INI$: nextsectionpos=[-1] midx=[6] sectionpos=[610]
506 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[UI=1..DlgTitle=Madics ATE Screen Capture...] itempos=[638]
507 13:59:41 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
508 13:59:41 <TELNET:APRNTSCRN:3af6> cstack rmv op x15 at offset 33, resoff=33
509 13:59:41 <TELNET:APRNTSCRN:3b14> cstack add op x15 at offset 33
510 13:59:41 <TELNET:INIX:3b14> Executing c:\ATE\DSK0\001004\inix.sbx @009339A8 (INIX @06A30CE8)
511 13:59:41 <TELNET:INIX:415> cstack add op x13 at offset 52
512 Read'INI'File(bas:aprntscrn.cfg,UI,DlgTitle,A-Shell Print Screen)
513 13:59:41 <TELNET:INIX:101b> cstack add op x13 at offset 63
514 Fn'Load'INI: fspec$=[bas:aprntscrn.cfg] f'bytes=[659] f'mtime=[1604419396]
515 13:59:41 <TELNET:INIX:7e8> cstack add op x13 at offset 74
516 13:59:41 <TELNET:INIX:7e8> cstack rmv op x13 at offset 74, resoff=0
517 Fn'Load'INI: MX_USRMAP midx=[6] modname$=[aprntscrn.x000] m'bytes=[8873] m'flags=[12]
518 Fn'Load'INI MX_USRIO: status=[22] modname$=[aprntscrn.x000] modhdr$=[ 659, 1604419396..]
519 Fn'Load'INI File matches memory module size and timestamp; no reload needed
520 13:59:41 <TELNET:INIX:101b> cstack rmv op x13 at offset 63, resoff=0
521 13:59:41 <TELNET:INIX:1065> cstack add op x13 at offset 63
522 Fn'Module'Instr(6,[UI],0)
523 Fn'Module'Instr ashver=[1692.1]
524 Fn'Module'Instr searchmode=[4] returns 610
525 13:59:41 <TELNET:INIX:1065> cstack rmv op x13 at offset 63, resoff=0
526 Fn'Read'INI$: sectionpos=[610] midx=[6]
527 13:59:41 <TELNET:INIX:10da> cstack add op x13 at offset 63
528 Fn'Module'Instr(6,.DlgTitle=,611)
529 Fn'Module'Instr searchmode=[4] returns 644
530 13:59:41 <TELNET:INIX:10da> cstack rmv op x13 at offset 63, resoff=0
531 Fn'Read'INI$: itempos=[644] midx=[6] sectionpos=[610]
532 13:59:41 <TELNET:INIX:1165> cstack add op x13 at offset 63
533 Fn'Module'Instr(6,.[,611)
534 Fn'Module'Instr searchmode=[4] returns -1
535 13:59:41 <TELNET:INIX:1165> cstack rmv op x13 at offset 63, resoff=0
536 Fn'Read'INI$: nextsectionpos=[-1] midx=[6] sectionpos=[610]
537 Fn'Read'INI$: status=[2000] midx=[6] linebuf$=[DlgTitle=Madics ATE Screen Capture.....] itempos=[644]
538 13:59:41 <TELNET:INIX:415> cstack rmv op x13 at offset 52, resoff=0
539 13:59:41 <TELNET:APRNTSCRN:3b14> cstack rmv op x15 at offset 33, resoff=33
540 13:59:41 <TELNET:APRNTSCRN:2aa> cstack rmv op x14 at offset 22, resoff=0
541 13:59:41 <TELNET:APRNTSCRN:2ca> cstack add op x13 at offset 22
542 13:59:41 <TELNET:APRNTSCRN:33e2> cstack add op x13 at offset 33
543 13:59:41 <TELNET:APRNTSCRN:425c> cstack add op x13 at offset 44
544 13:59:41 <TELNET:APRNTSCRN:425c> cstack rmv op x13 at offset 44, resoff=0
spec$: %miame%\captures, localspec$: c:\ATE\captures, status: 0
546 13:59:41 <TELNET:APRNTSCRN:33e2> cstack rmv op x13 at offset 33, resoff=0
final MX_FINDFIRST, c:\ATE\captures\* = 0
assigned imgfile$ - c:\ATE\captures\img119.png
549 13:59:41 <TELNET:APRNTSCRN:2ca> cstack rmv op x13 at offset 22, resoff=0
550 13:59:41 <TELNET:APRNTSCRN:2e1> cstack add op x13 at offset 22
551 13:59:41 <TELNET:APRNTSCRN:2e1> cstack rmv op x13 at offset 22, resoff=0
552 13:59:41 <TELNET:APRNTSCRN:2f7> cstack add op x14 at offset 22
553 13:59:41 <TELNET:APRNTSCRN:2f7> cstack rmv op x14 at offset 22, resoff=0
554 13:59:41 <TELNET:APRNTSCRN:2fc> cstack add op x14 at offset 22
555 13:59:41 <TELNET:APRNTSCRN:1383> cstack add op x14 at offset 33
556 13:59:41 <TELNET:APRNTSCRN:13db> SETFOCUS
557 13:59:41 <TELNET:APRNTSCRN:15df> cstack add op x13 at offset 44
558 13:59:41 <TELNET:APRNTSCRN:15df> cstack rmv op x13 at offset 44, resoff=0
559 13:59:41 <TELNET:APRNTSCRN:1680> cstack add op x13 at offset 44
560 13:59:41 <TELNET:APRNTSCRN:1680> cstack rmv op x13 at offset 44, resoff=0
561 13:59:41 <TELNET:APRNTSCRN:17ac> cstack add op x14 at offset 44
562 13:59:41 <TELNET:APRNTSCRN:17ac> cstack rmv op x14 at offset 44, resoff=0
563 13:59:41 <TELNET:APRNTSCRN:17bc> cstack add op x14 at offset 44
564 13:59:41 <TELNET:APRNTSCRN:17bc> cstack rmv op x14 at offset 44, resoff=0
565 13:59:41 <TELNET:APRNTSCRN:17e7> cstack add op x14 at offset 44
566 13:59:41 <TELNET:APRNTSCRN:17e7> cstack rmv op x14 at offset 44, resoff=0
567 13:59:41 <TELNET:APRNTSCRN:1812> cstack add op x14 at offset 44
568 13:59:41 <TELNET:APRNTSCRN:1812> cstack rmv op x14 at offset 44, resoff=0
569 13:59:41 <TELNET:APRNTSCRN:1848> cstack add op x14 at offset 44
570 13:59:41 <TELNET:APRNTSCRN:1848> cstack rmv op x14 at offset 44, resoff=0
571 13:59:41 <TELNET:APRNTSCRN:1884> cstack add op x14 at offset 44
572 13:59:41 <TELNET:APRNTSCRN:1884> cstack rmv op x14 at offset 44, resoff=0
573 13:59:41 <TELNET:APRNTSCRN:18b5> cstack add op x14 at offset 44
574 13:59:41 <TELNET:APRNTSCRN:18b5> cstack rmv op x14 at offset 44, resoff=0
575 13:59:41 <TELNET:APRNTSCRN:18fb> cstack add op x14 at offset 44
576 13:59:41 <TELNET:APRNTSCRN:18fb> cstack rmv op x14 at offset 44, resoff=0
577 13:59:41 <TELNET:APRNTSCRN:1934> cstack add op x14 at offset 44
578 13:59:41 <TELNET:APRNTSCRN:1934> cstack rmv op x14 at offset 44, resoff=0
579 13:59:41 <TELNET:APRNTSCRN:1383> cstack rmv op x14 at offset 33, resoff=0
580 13:59:41 <TELNET:APRNTSCRN:1388> cstack add op x14 at offset 33
581 13:59:41 <TELNET:APRNTSCRN:7c8> cstack add op x14 at offset 44
582 13:59:41 <TELNET:APRNTSCRN:7c8> cstack rmv op x14 at offset 44, resoff=0
583 13:59:41 <TELNET:APRNTSCRN:800> cstack add op x14 at offset 44
584 13:59:41 <TELNET:APRNTSCRN:800> cstack rmv op x14 at offset 44, resoff=0
585 13:59:41 <TELNET:APRNTSCRN:80c> cstack add op x14 at offset 44
586 13:59:41 <TELNET:APRNTSCRN:80c> cstack rmv op x14 at offset 44, resoff=0
587 13:59:41 <TELNET:APRNTSCRN:1388> cstack rmv op x14 at offset 33, resoff=0
588 13:59:42 <TELNET:APRNTSCRN:1391> cstack add op x14 at offset 33
589 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
590 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
591 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
592 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,rbScreen)
594 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
595 13:59:42 <TELNET:APRNTSCRN:2985> cstack add op x14 at offset 55
596 13:59:42 <TELNET:APRNTSCRN:1988> cstack add op x13 at offset 66
597 13:59:42 <TELNET:APRNTSCRN:1988> cstack rmv op x13 at offset 66, resoff=0
598 13:59:42 <TELNET:APRNTSCRN:2985> cstack rmv op x14 at offset 55, resoff=0
599 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
600 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
601 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
602 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
603 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
604 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
605 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,rbMain)
607 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
608 13:59:42 <TELNET:APRNTSCRN:29ec> cstack add op x14 at offset 55
609 13:59:42 <TELNET:APRNTSCRN:1a30> cstack add op x13 at offset 66
610 13:59:42 <TELNET:APRNTSCRN:1a30> cstack rmv op x13 at offset 66, resoff=0
611 13:59:42 <TELNET:APRNTSCRN:29ec> cstack rmv op x14 at offset 55, resoff=0
612 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
613 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
614 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
615 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
616 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
617 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
618 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,rbCurWin)
620 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
621 13:59:42 <TELNET:APRNTSCRN:2a52> cstack add op x14 at offset 55
622 13:59:42 <TELNET:APRNTSCRN:1ad8> cstack add op x13 at offset 66
623 13:59:42 <TELNET:APRNTSCRN:1ad8> cstack rmv op x13 at offset 66, resoff=0
624 13:59:42 <TELNET:APRNTSCRN:2a52> cstack rmv op x14 at offset 55, resoff=0
625 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
626 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
627 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
628 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
629 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
630 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
631 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,cbClient)
633 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
634 13:59:42 <TELNET:APRNTSCRN:2aca> cstack add op x14 at offset 55
635 13:59:42 <TELNET:APRNTSCRN:1b80> cstack add op x13 at offset 66
636 13:59:42 <TELNET:APRNTSCRN:1b80> cstack rmv op x13 at offset 66, resoff=0
637 13:59:42 <TELNET:APRNTSCRN:2aca> cstack rmv op x14 at offset 55, resoff=0
638 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
639 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
640 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
641 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
642 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
643 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
644 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,cbGray)
646 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
647 13:59:42 <TELNET:APRNTSCRN:2b38> cstack add op x14 at offset 55
648 13:59:42 <TELNET:APRNTSCRN:1c28> cstack add op x13 at offset 66
649 13:59:42 <TELNET:APRNTSCRN:1c28> cstack rmv op x13 at offset 66, resoff=0
650 13:59:42 <TELNET:APRNTSCRN:2b38> cstack rmv op x14 at offset 55, resoff=0
651 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
652 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
653 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
654 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
655 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
656 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
657 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,cbNegate)
659 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
660 13:59:42 <TELNET:APRNTSCRN:2bc5> cstack add op x14 at offset 55
661 13:59:42 <TELNET:APRNTSCRN:1cd1> cstack add op x13 at offset 66
662 13:59:42 <TELNET:APRNTSCRN:1cd1> cstack rmv op x13 at offset 66, resoff=0
663 13:59:42 <TELNET:APRNTSCRN:2bc5> cstack rmv op x14 at offset 55, resoff=0
664 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
665 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
666 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
667 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
668 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
669 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
670 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,cbInkSaver)
672 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
673 13:59:42 <TELNET:APRNTSCRN:2c51> cstack add op x14 at offset 55
674 13:59:42 <TELNET:APRNTSCRN:1d7a> cstack add op x13 at offset 66
675 13:59:42 <TELNET:APRNTSCRN:1d7a> cstack rmv op x13 at offset 66, resoff=0
676 13:59:42 <TELNET:APRNTSCRN:2c51> cstack rmv op x14 at offset 55, resoff=0
677 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
678 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
679 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
680 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
681 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
682 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
683 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,rbPortrait)
685 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
686 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
687 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
688 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
689 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
690 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
691 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
692 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,rbLandscape)
694 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
695 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
696 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
697 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
698 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
699 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
700 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
701 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,txtPtr)
703 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
704 13:59:42 <TELNET:APRNTSCRN:2d25> cstack add op x13 at offset 55
705 13:59:42 <TELNET:APRNTSCRN:2622> cstack add op x15 at offset 66
706 13:59:42 <TELNET:SBXINP:2622> Executing c:\ATE\DSK0\007006\SBXINP.SBX @06A3F7A8 (SBXINP @008C9068)
707 13:59:42 <TELNET:SBXINP:406> cstack add op x11 at offset 85
708 13:59:42 <TELNET:SBXINP:18c5> cstack rmv op x11 at offset 85, resoff=0
709 13:59:42 <TELNET:SBXINP:59c> cstack add op x14 at offset 85
sbxinp adjust'opcode: 2, flag'disable=0
711 13:59:42 <TELNET:SBXINP:59c> cstack rmv op x14 at offset 85, resoff=0
712 13:59:42 <TELNET:SBXINP:604> !Bad control name: stc2000-2000
713 13:59:42 <TELNET:SBXINP:62a> cstack add op x14 at offset 85
714 13:59:42 <TELNET:SBXINP:62a> cstack rmv op x14 at offset 85, resoff=0
715 13:59:42 <TELNET:SBXINP:6e5> cstack add op x13 at offset 85
716 13:59:42 <TELNET:SBXINP:1687> cstack add op x13 at offset 96
717 13:59:42 <TELNET:SBXINP:1687> cstack rmv op x13 at offset 96, resoff=0
718 13:59:42 <TELNET:SBXINP:6e5> cstack rmv op x13 at offset 85, resoff=0
719 13:59:42 <TELNET:APRNTSCRN:2622> cstack rmv op x15 at offset 66, resoff=66
720 13:59:42 <TELNET:APRNTSCRN:2d25> cstack rmv op x13 at offset 55, resoff=0
721 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
722 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
723 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
724 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
725 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
726 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
727 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,txtNotes)
729 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
730 13:59:42 <TELNET:APRNTSCRN:2cc3> cstack add op x13 at offset 55
731 13:59:42 <TELNET:APRNTSCRN:24b3> cstack add op x15 at offset 66
732 13:59:42 <TELNET:SBXINP:24b3> Executing c:\ATE\DSK0\001004\sbxinp.sbx @06A3F7A8 (SBXINP @008C9068)
733 13:59:42 <TELNET:SBXINP:406> cstack add op x11 at offset 85
734 13:59:42 <TELNET:SBXINP:18c5> cstack rmv op x11 at offset 85, resoff=0
735 13:59:42 <TELNET:SBXINP:59c> cstack add op x14 at offset 85
sbxinp adjust'opcode: 2, flag'disable=0
737 13:59:42 <TELNET:SBXINP:59c> cstack rmv op x14 at offset 85, resoff=0
738 13:59:42 <TELNET:SBXINP:604> !Bad control name: stc13500-12000
739 13:59:42 <TELNET:SBXINP:62a> cstack add op x14 at offset 85
740 13:59:42 <TELNET:SBXINP:62a> cstack rmv op x14 at offset 85, resoff=0
741 13:59:42 <TELNET:SBXINP:664> cstack add op x11 at offset 85
742 13:59:42 <TELNET:SBXINP:a04> cstack add op x13 at offset 96
743 13:59:42 <TELNET:SBXINP:a04> cstack rmv op x13 at offset 96, resoff=0
744 13:59:42 <TELNET:SBXINP:a15> cstack add op x14 at offset 96
745 13:59:42 <TELNET:SBXINP:a15> cstack rmv op x14 at offset 96, resoff=0
746 13:59:42 <TELNET:SBXINP:ecb> cstack rmv op x11 at offset 85, resoff=0
747 13:59:42 <TELNET:SBXINP:6e5> cstack add op x13 at offset 85
748 13:59:42 <TELNET:SBXINP:1687> cstack add op x13 at offset 96
749 13:59:42 <TELNET:SBXINP:1687> cstack rmv op x13 at offset 96, resoff=0
750 13:59:42 <TELNET:SBXINP:6e5> cstack rmv op x13 at offset 85, resoff=0
751 13:59:42 <TELNET:APRNTSCRN:24b3> cstack rmv op x15 at offset 66, resoff=66
752 13:59:42 <TELNET:APRNTSCRN:2cc3> cstack rmv op x13 at offset 55, resoff=0
753 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
754 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
755 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
756 13:59:42 <TELNET:APRNTSCRN:28b0> cstack add op x14 at offset 44
757 13:59:42 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 55
758 13:59:42 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 55, resoff=0
759 13:59:42 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 55
fld'pre(2,txtImgFile)
761 13:59:42 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 55, resoff=0
762 13:59:42 <TELNET:APRNTSCRN:2cf6> cstack add op x13 at offset 55
763 13:59:42 <TELNET:APRNTSCRN:257c> cstack add op x15 at offset 66
764 13:59:42 <TELNET:SBXINP:257c> Executing c:\ATE\DSK0\001004\sbxinp.sbx @06A3F7A8 (SBXINP @008C9068)
765 13:59:42 <TELNET:SBXINP:406> cstack add op x11 at offset 85
766 13:59:42 <TELNET:SBXINP:18c5> cstack rmv op x11 at offset 85, resoff=0
767 13:59:42 <TELNET:SBXINP:59c> cstack add op x14 at offset 85
sbxinp adjust'opcode: 2, flag'disable=0
769 13:59:42 <TELNET:SBXINP:59c> cstack rmv op x14 at offset 85, resoff=0
770 13:59:42 <TELNET:SBXINP:604> !Bad control name: stc15000-12000
771 13:59:42 <TELNET:SBXINP:62a> cstack add op x14 at offset 85
772 13:59:42 <TELNET:SBXINP:62a> cstack rmv op x14 at offset 85, resoff=0
773 13:59:42 <TELNET:SBXINP:664> cstack add op x11 at offset 85
774 13:59:42 <TELNET:SBXINP:a04> cstack add op x13 at offset 96
775 13:59:42 <TELNET:SBXINP:a04> cstack rmv op x13 at offset 96, resoff=0
776 13:59:42 <TELNET:SBXINP:a15> cstack add op x14 at offset 96
777 13:59:42 <TELNET:SBXINP:a15> cstack rmv op x14 at offset 96, resoff=0
778 13:59:42 <TELNET:SBXINP:ecb> cstack rmv op x11 at offset 85, resoff=0
779 13:59:42 <TELNET:SBXINP:6e5> cstack add op x13 at offset 85
780 13:59:42 <TELNET:SBXINP:1687> cstack add op x13 at offset 96
781 13:59:42 <TELNET:SBXINP:1687> cstack rmv op x13 at offset 96, resoff=0
782 13:59:42 <TELNET:SBXINP:6e5> cstack rmv op x13 at offset 85, resoff=0
783 13:59:42 <TELNET:APRNTSCRN:257c> cstack rmv op x15 at offset 66, resoff=66
784 13:59:42 <TELNET:APRNTSCRN:2cf6> cstack rmv op x13 at offset 55, resoff=0
785 13:59:42 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 55
786 13:59:42 <TELNET:APRNTSCRN:2d35> cstack rmv op x13 at offset 55, resoff=0
787 13:59:42 <TELNET:APRNTSCRN:28b0> cstack rmv op x14 at offset 44, resoff=0
788 13:59:42 <TELNET:APRNTSCRN:1391> cstack rmv op x14 at offset 33, resoff=0
789 13:59:42 <TELNET:APRNTSCRN:13cd> cstack add op x14 at offset 33
790 13:59:42 <TELNET:APRNTSCRN:7c8> cstack add op x14 at offset 44
791 13:59:42 <TELNET:APRNTSCRN:7c8> cstack rmv op x14 at offset 44, resoff=0
792 13:59:42 <TELNET:APRNTSCRN:800> cstack add op x14 at offset 44
793 13:59:42 <TELNET:APRNTSCRN:800> cstack rmv op x14 at offset 44, resoff=0
794 13:59:42 <TELNET:APRNTSCRN:80c> cstack add op x14 at offset 44
795 13:59:42 <TELNET:APRNTSCRN:80c> cstack rmv op x14 at offset 44, resoff=0
796 13:59:42 <TELNET:APRNTSCRN:13cd> cstack rmv op x14 at offset 33, resoff=0
797 13:59:42 <TELNET:APRNTSCRN:2fc> cstack rmv op x14 at offset 22, resoff=0
798 13:59:46 <TELNET:APRNTSCRN:31a> Click string: VK_xF205 (prev: ), elapse=193827484, hwnd=0x90958
799 13:59:46 <TELNET:APRNTSCRN:401> cstack add op x14 at offset 22
800 13:59:46 <TELNET:APRNTSCRN:401> cstack rmv op x14 at offset 22, resoff=0
801 13:59:46 <TELNET:APRNTSCRN:406> cstack add op x14 at offset 22
802 13:59:46 <TELNET:APRNTSCRN:94e> getcondev: ntts=0, condev=DESKTOP-2F8O84F:01, options=0, nameset=1, iname=
803 13:59:46 <TELNET:APRNTSCRN:df8> cstack add op x13 at offset 33
804 13:59:46 <TELNET:APRNTSCRN:df8> cstack rmv op x13 at offset 33, resoff=0
805 13:59:46 <TELNET:APRNTSCRN:12f3> ate_read_registry SOFTWARE\MicroSabio\JBCT\ATE\Hosts\madics
806 13:59:46 <TELNET:APRNTSCRN:12f3> Trace: EZSPL SPL options: PON=0, TPA=0, AON=0, OPT=1, tbl=0
807 13:59:46 <TELNET:APRNTSCRN:12f3> Trace: EZSPL prv=0, pon=0, tpa=0, sw=0x10000, options=0x0, guiflags=261
808 13:59:46 <TELNET:APRNTSCRN:12f3> Trace: EZSPL preview_req = 0, print_req = 1, switches = 65536 (10000)
809 13:59:46 <TELNET:APRNTSCRN:12f3> Trace: EZSPL calling fspool, ptr = PROMPT, switches = 65536 (10000)
SPOOL file=c:\ATE\captures\img119.prt, ptr=PROMPT, switches=65536, copies=1, form=, totpages=0
prefix=, suffix=, overlay=
Printer init file not found, try treating as DEVICE= name
lpp=0, cpp=0, cppw=0, width=0, tmar=0, lmar=0, fnh=-9999, fnw=0, land=0, flags=0x0
814 13:59:46 <TELNET:APRNTSCRN:12f3> GetDefaultPrinter1 (from last-used in registry): \\DIPT-FP1\Derby Service Centre Laserjet
815 13:59:46 <TELNET:APRNTSCRN:12f3> Verifying last used printer (retrieving handle) [\\DIPT-FP1\Derby Service Centre Laserjet]...
816 13:59:46 <TELNET:APRNTSCRN:12f3> ClosePrinter(92b054)
817 13:59:49 <TELNET:APRNTSCRN:12f3> SETFOCUS
818 13:59:49 <TELNET:APRNTSCRN:12f3> SETFOCUS
819 13:59:49 <TELNET:APRNTSCRN:12f3> SETFOCUS
820 13:59:49 <TELNET:APRNTSCRN:12f3> SETFOCUS
821 13:59:49 <TELNET:APRNTSCRN:12f3> SETFOCUS
822 13:59:49 <TELNET:APRNTSCRN:12f3> PrintDlgEx (from COMDLG32.DLL): 0x75a82790, hr=0, e=-1, action=print, copies=1
823 13:59:49 <TELNET:APRNTSCRN:12f3> APEX state1 saved - PVptr=\\DIPT-FP1\Derby Service Centre Laserjet, PromptPtr=\\DIPT-FP1\Derby Service Centre Laserjet
Winptr dvr = winspool, name = \\DIPT-FP1\Derby Service Centre Laserjet, port = WSD-b7738814-5759-4awinspool, Passthrough = OFF
Pre scan file...
826 13:59:49 <TELNET:APRNTSCRN:12f3> Longest line = 70
Requesting printer DC for \\DIPT-FP1\DERBY SERVICE CENTRE LASERJET using devmode 6a517c0
828 13:59:50 <TELNET:APRNTSCRN:12f3> Initial page size: 4960 x 7015 pixels
829 13:59:50 <TELNET:APRNTSCRN:12f3> Retrieving handle to printer [\\DIPT-FP1\DERBY SERVICE CENTRE LASERJET] (for duplex/paper setup)...
830 13:59:50 <TELNET:APRNTSCRN:12f3> [OK: hPrinter=944ad54]
831 13:59:50 <TELNET:APRNTSCRN:12f3> DEVMODE Device:\\DIPT-FP1\Derby Service Centr, Ver:1539, Size:220, Extra:8412, bin=257, duplex=2, paper=9, orient=1, copies=1, dmFields=0x780ff43
832 13:59:50 <TELNET:APRNTSCRN:12f3> Updated page size: 4960 x 7015 pixels
833 13:59:50 <TELNET:APRNTSCRN:12f3> SETFOCUS
StartDoc(9f210d18) ok
835 13:59:50 <TELNET:APRNTSCRN:12f3> Final page size: 4960 x 7015 pixels (600 x 600 dpi); print area: 100,100,4860,6915
Creating auto pitch font: face=, ht,wd=124,-80, wt=400
837 13:59:50 <TELNET:APRNTSCRN:12f3> ProcessSetFont ht=103, leading=0, avg width=54, mapmode=1, hfont=f40a0c21
Final adjusted auto pitch font: face=, ht=103, wd av/mx=54/67 pix (600 dpi), wt=400
StartPage(9f210d18) (Page 1) ok
840 13:59:50 <TELNET:APRNTSCRN:12f3> ProcessSetFont ht=116, leading=3, avg width=46, mapmode=1, hfont=f80a0c21
841 13:59:50 <TELNET:APRNTSCRN:12f3> ProcessSetFont ht=92, leading=3, avg width=37, mapmode=1, hfont=f50a0f23
842 13:59:50 <TELNET:APRNTSCRN:12f3> Printing image c:\ATE\captures\img119.png (734 x 586) in rect (206,600,4706,4200) (pixels)
843 13:59:50 <TELNET:APRNTSCRN:12f3> Adjusting image rect to 206,600,4560,6815 to fit page
844 13:59:50 <TELNET:APRNTSCRN:12f3> Adjusted image print rect: 205,658,4557,4140 pix
845 13:59:50 <TELNET:APRNTSCRN:12f3> ProcessSetFont ht=67, leading=2, avg width=26, mapmode=1, hfont=70a0c21
EndPage(9f210d18) ok
EndDoc(9f210d18) ok
DeleteDC(9f210d18) pv0
849 13:59:50 <TELNET:APRNTSCRN:12f3> ClosePrinter(944ad54)
850 13:59:50 <TELNET:APRNTSCRN:12f3> return from x_ezspl()
851 13:59:50 <TELNET:APRNTSCRN:406> cstack rmv op x14 at offset 22, resoff=0
852 13:59:50 <TELNET:APRNTSCRN:365> cstack add op x13 at offset 22
853 13:59:50 <TELNET:APRNTSCRN:28cc> cstack add op x13 at offset 33
854 13:59:50 <TELNET:APRNTSCRN:28cc> cstack rmv op x13 at offset 33, resoff=0
855 13:59:50 <TELNET:APRNTSCRN:28d7> cstack add op x14 at offset 33
fld'pre(1,txtPtr)
857 13:59:50 <TELNET:APRNTSCRN:28d7> cstack rmv op x14 at offset 33, resoff=0
858 13:59:50 <TELNET:APRNTSCRN:2d25> cstack add op x13 at offset 33
859 13:59:50 <TELNET:APRNTSCRN:2622> cstack add op x15 at offset 44
860 13:59:50 <TELNET:SBXINP:2622> Executing c:\ATE\DSK0\001004\sbxinp.sbx @06A3F7A8 (SBXINP @0087A7D0)
861 13:59:50 <TELNET:SBXINP:406> cstack add op x11 at offset 63
862 13:59:50 <TELNET:SBXINP:18c5> cstack rmv op x11 at offset 63, resoff=0
863 13:59:50 <TELNET:SBXINP:59c> cstack add op x14 at offset 63
sbxinp adjust'opcode: 1, flag'disable=0
865 13:59:50 <TELNET:SBXINP:59c> cstack rmv op x14 at offset 63, resoff=0
866 13:59:50 <TELNET:SBXINP:62a> cstack add op x14 at offset 63
867 13:59:50 <TELNET:SBXINP:62a> cstack rmv op x14 at offset 63, resoff=0
868 13:59:50 <TELNET:SBXINP:6e5> cstack add op x13 at offset 63
869 13:59:50 <TELNET:SBXINP:1687> cstack add op x13 at offset 74
870 13:59:50 <TELNET:SBXINP:1687> cstack rmv op x13 at offset 74, resoff=0
871 13:59:59 <TELNET:SBXINP:1687> Click string: VK_xF207 (prev: VK_xF205), elapse=193839843, hwnd=0x90946
872 13:59:59 <TELNET:SBXINP:1687> pseudofunkey ch=50, fval=0
873 13:59:59 <TELNET:SBXINP:1687> pseudofunkey ch=48, fval=2
874 13:59:59 <TELNET:SBXINP:1687> pseudofunkey ch=55, fval=20
875 13:59:59 <TELNET:SBXINP:1687> pseudofunkey ch=46, fval=207
876 13:59:59 <TELNET:SBXINP:1687> funbit(207) = -207, funmap=-1
877 13:59:59 <TELNET:SBXINP:16ca> cstack add op x13 at offset 74
878 13:59:59 <TELNET:SBXINP:16ca> cstack rmv op x13 at offset 74, resoff=0
879 13:59:59 <TELNET:SBXINP:6e5> cstack rmv op x13 at offset 63, resoff=0
880 13:59:59 <TELNET:APRNTSCRN:2622> cstack rmv op x15 at offset 44, resoff=44
881 13:59:59 <TELNET:APRNTSCRN:2d25> cstack rmv op x13 at offset 33, resoff=0
882 13:59:59 <TELNET:APRNTSCRN:2d35> cstack add op x13 at offset 33
883 13:59:59 <TELNET:APRNTSCRN:2eff> cstack add op x14 at offset

0 13:55:19 <TELNET:45e4> SETFOCUS
1 13:55:19 <TELNET:45e4> SETFOCUS
2 13:55:27 <TELNET:45e4> SETFOCUS
3 13:55:27 <TELNET:45e4> after sendkbdstr: 0,9, icc=0, buf[0]=0
4 13:55:28 <TELNET:45e4> SETFOCUS
5 13:55:29 <TELNET:45e4> SETFOCUS
6 13:55:29 <TELNET:45e4> SETFOCUS
7 13:55:29 <TELNET:45e4> SETFOCUS
8 13:55:29 <TELNET:45e4> SETFOCUS
9 13:55:29 <TELNET:45e4> SETFOCUS
10 13:55:31 <TELNET:45e4> SETFOCUS
11 13:55:35 <TELNET:45e4> wait on socket: 13:55:31 ....
12 13:55:40 <TELNET:45e4> wait on socket: 13:55:36 ....
13 13:55:44 <TELNET:45e4> SETFOCUS
14 13:55:46 <TELNET:45e4> SETFOCUS
15 13:55:46 <TELNET:45e4> AUX ON rcvd, w.wtc = 0
16 13:55:46 <TELNET:45e4> Save attribs: xy=23,70; cat=0, rat=0, fg=2, bg=0
17 13:55:47 <TELNET:45e4> Restore attribs: xy=23,70; cat=0, rat=0, fg=2, bg=0
Chain->0x7345a38
18 13:55:47 <TELNET:45e4> ate_read_registry SOFTWARE\MicroSabio\JBCT\ATE\Hosts\madics
19 13:56:06 <TELNET:45e4> SETFOCUS
20 13:56:07 <TELNET:45e4> SETFOCUS
21 13:56:14 <TELNET:45e4> wait on socket: 13:56:07 .....
22 13:56:20 <TELNET:45e4> wait on socket: 13:56:14 .....

We probably could have done without the XDEBUG trace (which is responsible for all the cstack messages). But looking past that, the first trace appears to show a normal print operation (see traces 822-849). In particular, there's no indication of a problem retrieving the handle to the printer device (829). To be clear, are you saying that everything appears to go normally from the user's perspective, except nothing comes out of the printer? Does the printer even wake up or spit out a blank page?

The AUXLOC trace didn't give us what we were looking for. Here's a simple recipe if you want to try again.

1. Settings > Connection Properties to bring up the connection properties dialog, click the Printer tab, and tick the Debug checkbox.
2. Get out to the dot prompt.
3. If necessary, create a printer init file containing DEVICE = AUXLOC: (mine was called AUXLOC.PQI)
4. PRINT AUXLOC=SYS:ERSATZ.INI

In my case, my default ATE printer is PDF-XCHANGE, but regardless the trace should look something like this...



The main area of interest is just past line 15 where it displays details about the driver, printer name, and port. I guess what I'm hoping to see is that the it's different than the case you listed for APRNTSCRN. If it all looks the same, it's going to be pretty hard to figure out why one works and one doesn't.

Normally I would try to reproduce these problems here. (It's generally possible to install any printer driver and attach it to a FILE: device to test driver issues without actually having to have the hardware.) But WSD may be a special case. As far as I know, there is no virtual WSD printer driver that can be installed for testing the WSD port, and there's no way to manually add a WSD port and then use it with an existing printer. The port is only created by the plug-and-play operation on a printer that supports it. I guess in a case like this we then graciously offer to allow the customer to send us their device for testing. (Just out of curiosity - on the outside chance that the customer does leap at my offer, what is the actual printer model in question? The "Winptr dvr = winspool, name = \\DIPT-FP1\Derby Service Centre Laserjet, port = WSD-b7738814-5759-4awinspool" doesn't really provide much to go on.)

Hi Jack,

There are no errors, nothing happens on the printer at all (nothing goes into the queue in Windows).

Thanks, I will do the second trace again, properly this time and dig out the full model, it is some kind of Laserjet 400 series.

Yours,

Dominic

AUXLOC trace to the same windows printer.


SPOOL file=C:\Users\gh\OneDrive - DIPT Limited\Documents\APEX\t78372-1.lpf, ptr=ATE0, switches=16777344, copies=1, form=, totpages=0
prefix=, suffix=, overlay=
2 10:02:48 <TELNET:45e4> Trace: ATE0.INI : DEVICE= PROMPT(DEFAULT):
3 10:02:48 <TELNET:45e4> Trace: ATE0.INI : PASSTHROUGH= OFF
4 10:02:48 <TELNET:45e4> Trace: ATE0.INI : CRLF= OFF
5 10:02:48 <TELNET:45e4> Trace: ATE0.INI : STRIPFF= OFF
6 10:02:48 <TELNET:45e4> Trace: ATE0.INI : FORMFEED= OFF
7 10:02:48 <TELNET:45e4> Trace: ATE0.INI : PITCH= AUTO
8 10:02:48 <TELNET:45e4> Trace: ATE0.INI : CPP= 80,AUTO
9 10:02:48 <TELNET:45e4> Trace: ATE0.INI : LPP= 66
lpp=66, cpp=80, cppw=-1, width=0, tmar=0, lmar=0, fnh=-9999, fnw=0, land=0, flags=0x840004
11 10:02:48 <TELNET:45e4> GetDefaultPrinter: use system default
12 10:02:48 <TELNET:45e4> GetDefaultPrinter (from WINSPOOL.DVR): \\DIPT-FP1\Derby Service Centre Laserjet (e=0)
13 10:02:48 <TELNET:45e4> Verifying default printer (retrieving handle) [\\DIPT-FP1\Derby Service Centre Laserjet]...
14 10:02:48 <TELNET:45e4> ClosePrinter(52ce2ac)
15 10:02:56 <TELNET:45e4> PrintDlgEx (from COMDLG32.DLL): 0x76dd2790, hr=0, e=-1, action=print, copies=1
16 10:02:56 <TELNET:45e4> APEX state1 saved - PVptr=\\DIPT-FP1\Derby Service Centre Laserjet, PromptPtr=\\DIPT-FP1\Derby Service Centre Laserjet
Winptr dvr = winspool, name = \\DIPT-FP1\Derby Service Centre Laserjet, port = WSD-b7738814-5759-4awinspool, Passthrough = OFF
Pre scan file...
19 10:02:56 <TELNET:45e4> Longest line = 104
Starting print using hdcprinter 55211183
21 10:02:56 <TELNET:45e4> Initial page size: 4960 x 7015 pixels
22 10:02:56 <TELNET:45e4> Retrieving handle to printer [\\DIPT-FP1\DERBY SERVICE CENTRE LASERJET] (for duplex/paper setup)...
23 10:02:56 <TELNET:45e4> [OK: hPrinter=530d324]
24 10:02:56 <TELNET:45e4> Allocated 0 bytes for DEVMODE
25 10:02:56 <TELNET:45e4> Selecting paper A4 from SUPPORTED papers:
26 10:02:56 <TELNET:45e4> LETTER (1) "Letter"
(215.9 x 279.4 mm, 8.5 x 11.0 in)
27 10:02:56 <TELNET:45e4> LEGAL (5) "Legal"
(215.9 x 355.6 mm, 8.5 x 14.0 in)
28 10:02:56 <TELNET:45e4> EXECUTIVE (7) "Executive"
(184.1 x 266.7 mm, 7.2 x 10.5 in)
29 10:02:56 <TELNET:45e4> Matched requested paper name "A4" to #0
30 10:02:56 <TELNET:45e4> A4 (9) "A4"
(210.0 x 297.0 mm, 8.3 x 11.7 in)
31 10:02:56 <TELNET:45e4> A5 (11) "A5"
(148.0 x 210.0 mm, 5.8 x 8.3 in)
32 10:02:56 <TELNET:45e4> B5 (13) "B5 (JIS)"
(182.0 x 257.0 mm, 7.2 x 10.1 in)
33 10:02:56 <TELNET:45e4> ENV_10 (20) "Envelope #10"
(104.7 x 241.3 mm, 4.1 x 9.5 in)
34 10:02:56 <TELNET:45e4> ENV_DL (27) "Envelope DL"
(110.0 x 220.0 mm, 4.3 x 8.7 in)
35 10:02:56 <TELNET:45e4> ENV_C5 (28) "Envelope C5"
(162.0 x 229.0 mm, 6.4 x 9.0 in)
36 10:02:56 <TELNET:45e4> ENV_B5 (34) "Envelope B5"
(176.0 x 250.0 mm, 6.9 x 9.8 in)
37 10:02:56 <TELNET:45e4> ENV_MONARCH (37) "Envelope Monarch"
(98.4 x 190.5 mm, 3.9 x 7.5 in)
38 10:02:56 <TELNET:45e4> JAPANESE_POSTCARD (43) "Japanese Postcard"
(100.0 x 148.0 mm, 3.9 x 5.8 in)
39 10:02:56 <TELNET:45e4> A6 (70) "A6"
(105.0 x 148.0 mm, 4.1 x 5.8 in)
40 10:02:56 <TELNET:45e4> DBL_JAPANESE_POSTCARD_ROTATED (82) "Double Japan Postcard Rotated"
(148.0 x 200.0 mm, 5.8 x 7.9 in)
41 10:02:56 <TELNET:45e4> B6_JIS (88) "B6 (JIS)"
(128.0 x 182.0 mm, 5.0 x 7.2 in)
42 10:02:56 <TELNET:45e4> papersize: #144 (144) "10x15cm"
(101.6 x 152.4 mm, 4.0 x 6.0 in)
43 10:02:56 <TELNET:45e4> DEVMODE Device:\\DIPT-FP1\Derby Service Centr, Ver:1539, Size:220, Extra:8412, bin=257, duplex=2, paper=9, orient=1, copies=1, dmFields=0x780ff43
44 10:02:56 <TELNET:45e4> Setting duplex mode HORZ
45 10:02:56 <TELNET:45e4> Requesting papersize #9
46 10:02:56 <TELNET:45e4> Requesting orientation
47 10:02:57 <TELNET:45e4> Updated page size: 7015 x 4960 pixels
StartDoc(55211183) ok
49 10:02:57 <TELNET:45e4> Final page size: 7015 x 4960 pixels (600 x 600 dpi); print area: 100,100,6915,4860
Creating auto pitch font: face=, ht,wd=86,-105, wt=400
51 10:02:57 <TELNET:45e4> ProcessSetFont ht=71, leading=0, avg width=63, mapmode=1, hfont=720a1107
Final adjusted auto pitch font: face=, ht=71, wd av/mx=63/78 pix (600 dpi), wt=400
StartPage(55211183) (Page 1) ok
54 10:02:57 <TELNET:45e4> Printing image prodnot.png (2244 x 1658) in rect (56,56,9998,13514) (pixels)
55 10:02:57 <TELNET:45e4> Adjusting image rect to 56,56,6765,4710 to fit page
56 10:02:57 <TELNET:45e4> ProcessSetFont ht=92, leading=0, avg width=57, mapmode=1, hfont=930a1162
57 10:02:57 <TELNET:45e4> ProcessSetFont ht=92, leading=0, avg width=57, mapmode=1, hfont=910a0f10
58 10:02:57 <TELNET:45e4> ProcessSetFont ht=92, leading=0, avg width=56, mapmode=1, hfont=a00a1162
EndPage(55211183) ok
EndDoc(55211183) ok
DeleteDC(55211183) pv0
62 10:02:57 <TELNET:45e4> ClosePrinter(530d324)
63 10:02:57 <TELNET:45e4> return from x_ezspl()

The main difference I see between the two traces is the orientation; the first one was portrait and the second landscape. So the autopitch font dimensions are different, but that's hardly an excuse for not printing at all. (I might have wondered if it was a coordinate mix up, but you indicated that nothing even goes into the print queue, so that doesn't sound likely.)

What I was hoping to see was a difference in the device driver but this line is the same in both:

Winptr dvr = winspool, name = \\DIPT-FP1\Derby Service Centre Laserjet, port = WSD-b7738814-5759-4awinspool, Passthrough = OFF

It's tempting to say that the workaround is simply to change the APRNTSCRN printer to AUXLOC:, but that won't work because AUXLOC: isn't a valid/supported option when you're already printing from the local PC. Maybe we need a new DEVICE=BOOMERANG: that the local PC can use to send the print file to the server which then sends it back via AUXLOC:? Or not.

I hate to keep throwing out tasks to keep you busy, but given that we have two apparently equivalent printing operations, one that works and one that doesn't, it's hard to resist the urge to try to find another similar printing test that might act as a tie breaker, revealing a clue in the process. The only one that comes to mind would be to use the File > Open Local Session and try some kind of printing test from the local dot prompt.

Or, as a workaround would it be viable to print to a PDF driver instead of the WSD printer (and then print from the PDF viewer)?

They have changed the printer to an TCP/IP port and now it is all working. Unfortunately that means no more testing either, so it is likely to remain a mystery. I did get confirmation it is a HP MFP m427fdn printer.

It certainly takes the pressure off. I wonder if anyone else out there has any experience with the WSD printing interface. I hate to have to buy a piece of hardware just to test a software issue, but maybe a new printer is in my future. (Unfortunately though, all indications are that the problem may not show up, except under conditions that we haven't been able to identify.)

WSD is pretty awful all round.

We have had problems printing using system calls from our other software too. I think instead of a tried and tested port based system it is very driver and client dependent.

That's my impression too, which is why I'm (not so) secretly wishing it will just go away.

Hi,

We are experiencing an issue in the field with GDI printing. I have posted here as it seems very similar (if not the same issue) as the one Dominic is describing above.

It appears that printers that are installed using a WSD port refuse to print with ATE 6.5.1688.4 or higher. 6.5.1688.2 appears to work fine. I think I have eliminated the driver being a suspect as I had a printer installed in my development environment using WSD that will not print with the newer version of ATE, but does with the older one. I installed the same printer using a TCP port under a different name, and it prints fine with the newer version of ATE.

As much as I also dislike WSD and try to avoid it in the field as much as possible, it seems like it does make the setup of multi-function printers easier (when the user cares about being able to scan to their PC.)

Here is the client-side PQI file in use:


Any help is appreciated!

Thanks,
John Andreasen
Diversified Data Solutions

I'm not any smarter about WSD now than I was two months ago, but I'm starting to get the feeling that a new WSD printer may in my near future. I'm not even sure how to tell if a printer supports it though - I don't see it listed in the specs of any of the printers available at my local Office Depot (even though I suspect they probably all do these days). Any suggestions?

There was one potentially related change in 1688.3 that may be worth experimenting with backing out. It was actually a linker option to improve backwards compatibility. But without it, we had some weird display problems in certain environments, so I may need to do some digging. Give me a couple of days...

Our customer had 6 HP LaserJet Pro M118dw which combine the triple threat of cheap laser (ugh), wireless printing(arrgh) and WSD(bleeergh). I think most of them install as WSD by default if you use the manufacturer set up software.

As a test, I removed the backwards compatibility /SUBSYSTEM switch on the linker command for A-Shell. If you want to test whether that affects the WSD compatibility try this one:

ash-6.5.1697.0-w32c-upd.zip

Hi all, I went ahead and tried the 6.5.1697.0 version, and it seems that it does not resolve the issue. If it helps, the printer I am testing with here is a HP LaserJet M477fdw. The one at the customer that called is a Kyocera Taskalfa, but not sure of the model number.

On review, I think the change related to the /SUBSYSTEM switch only made it into w32c version. So if you tried it with the w32 version, it might be worth a few minutes of effort to try again with the w32c. Otherwise I guess I start printer shopping... (Sorry/thanks)

I should also note that the reason we made the switch in the first place was to restore the original dialog sizing, which mysteriously got about 20 pixels shorter and narrower after upgrading the development environment. So even if this fixes the WSD problem, it's not clear if it's a good tradeoff. But it would be interesting to know.

Glad you mentioned that as I did only try the w32 version. I have tried the C version now, but it does not resolve the issue. If you don't fell like getting a new printer, I could provide you access to my development environment where you could test.

I guess the good news is that I don't need to revisit the problem of the slight difference in dialog size when switching between the two /SUBSYSTEM variations. Still, if it really did work up until 6.5.1688.3 or 6.5.1688.4, it seems like I should be able to identify the issue. But so far I haven't.

It might be worth taking a stab and using your development environment if you want to get that set up.

It looks like I could purchase the m118dw that Dominic raves about above for a mere $118 on Amazon, but then I'd have to figure out what to do with the thing after (hopefully) resolving the issue. If I'm going to have to clutter up my office with a new printer (whatever happened to the paperless office anyway?), I'd rather get one that can double as a scanner. It looks like the m148dw would be the one, but it's not in stock anywhere for another month. (Dominic's comments about the perils of cheap printers notwithstanding,I don't do enough printing to justify a quality workhorse which is also going to take up a lot more office space.) There are Brother and Canon possibilities, but I've so far been unable to confirm whether they all support WSD. (Is it the case that all wireless printers support it? Or only those, like the LaserJets, that claim to be able to do it without requiring an existing wireless network?)

Obviously cheap lasers are fine for low volume but when people put them in dusty warehouses and expect them to do 200 plus prints a day it drives me nuts.

I think WSD is the fault of wireless printing but the only ones I can personally confirm often have WSD on printers that don't have wireless are HP ones, although that is the 400 series type (we normally recommend them) that John has which are bigger and more expensive.

Hi Jack, I just wanted to check on this and see if you had had gotten my email and have had time to look into the WSD printing issue yet?

Hi John - I don't see your email anywhere. But I have a printer due for delivery here on Wednesday, so since we've waited this long, we might as well wait a few more days so I use a hammer directly on the problem. I'll let you know...

OK, sorry about that! I guess I should have followed up sooner. Sounds like a good plan.

Believe it or not, after how many weeks/months of fooling around with debug settings and making excuses, I finally bought myself a Brother HL-2395DW, got it setup in WSD mode, and voilà, it has the exact problem you are both complaining about. Unfortunately, it's Friday night and I'm too burned out to go burrowing into the bits right now, but I'm officially on the case now.

I will observe a couple of points that you may already have recognized but could be a helpful refresher:

• The problem only seems to affect printing from the A-Shell standard printer dialog, but only in certain scenarios. The main one that I can reproduce is from the Print Screen utility, which by default is configured to prompt for the printer. Printing directly from the dot prompt (on Windows) or via AUXLOC: or via APEX all seem to work ok.
• The fact that APEX works provides one workaround (assuming you have APEX licensed) - use the Settings > Preview Preferences to make it the default. Of course it's a bit redundant for the Print Screen utility to have a Print Preview, but it is a workaround.
• Another workaround: edit your BAS:APRNTSCRN.CFG file and set the Printer to the name of a printer init file that specifies the printer in question in its DEVICE statement. (It also needs PASSTHROUGH=OFF). This takes away the option to select a printer, but if you always want to print to this particular WSD printer, it's a reasonable option. (Unfortunately it does require editing the CFG file, and possible creating a printer init file, so maybe not practical for end users).

Over the weekend try to drill further into it.

I'm happy to report that I think the following update fixes this WSD problem (along with a few other minor issues noted in the dev notes)...

ash65notes.txt
ash-6.5.1700.0-w32-upd.zip
ash-6.5.1700.0-w32c-upd.zip

The printing issue was actually a case of hanging on to backwards compatibility too long, or not long enough, depending on your perspective. The Windows function to create a printer device context (CreateDCW) contains a parameter (port) that was needed back in the WIN16 days, after which it was supposedly ignored. So A-Shell has been passing it all along. But apparently it wasn't entirely ignored, because when it contained a WSD port specification, it caused the function to appear to work (didn't return any errors), but the device context apparently just routed the output to the bit bucket.

So as of 6.5.1700.0, WSD printers are supported, and 16 bit Windows is officially unsupported!

Wow, thanks for persisting with this Jack! We will try and get the customer in question updated as soon as possible.

I like your choice of words .... "persisting" sounds much better then "procrastinating" !

Yes, thanks for the fix Jack. I can confirm that 6.5.1700.0 does fix the issue on my system.

Thanks for the confirmation. Sorry for letting it drag on so long.

No problem for us. Glad you were able to figure it out. (Hopefully without too much trouble.)